iMSO4.0
Publisher Description
Oscilloscope your phone, touch or tablet!
iMSO allows you to analyze 2 analog and up to 4 digital signals using the iMSO-204 mixed signal oscilloscope hardware. Although demo mode is available for free with this download, hardware must be purchased to fully enable the product.
- It's the first mixed signal oscilloscope available in the app store (50MSPS / 5MHz)
- Easiest, most intuitive scope you’ll ever use
- Preferred scope for the next generation of inventors
Software demo mode includes:
- Simulated wave display (sine, square, sawtooth, and triangular)
- Cursors w/ measurements
- Direct signal measurements
- Analog triggering
- Run / Stop / Single mode
Hardware mode includes:
- Analog triggering
- Digital triggering
- Cursors w/ measurements
- Direct signal measurements
- 1x or 10x probe setting
- Run / STOP / Single mode
Hardware works with the following devices:
- iPad mini 3
- iPad mini 2
- iPad mini
- iPad Air 2
- iPad Air
- iPad 4
- iPad 3
- iPad 2
- iPad
- iPhone 6 Plus
- iPhone 6
- iPhone 5C
- iPhone 5S
- iPhone 5
- iPhone 4S
- iPhone 4
- iPhone 3GS
- iPod touch [3rd (32GB only), 4th and 5th generation)
Version History Bug fixes. 4.0 07/29/2019 Bug fixes and UI enhancements. 3.4 11/24/2018 Bug fixes and UI enhancements. 3.3 10/09/2018 Fixed bugs.
* Special thanks to Bill for the bug report. 3.1 08/14/2017 *Added support for iMSO-204.
*Added all the features from iMSO2. 3.0 07/27/2017 Minor bug fixes. 2.8 07/20/2014 iOS 7 compatibility. 2.7 10/10/2013 Fixed a bug that causes a crash on the iPad (4th generation). 2.6 12/13/2012 Press the Menu button to show or hide the menu. 2.5 12/05/2012 Minor bug fixes. 2.4 11/02/2012 * Optimized for iOS 6.0.
* Optimized for iPhone 5.
* Optimized app to use less memory and run faster.
* Included text in body of email with screenshot.
* Various bug fixes.
* Included Tooltips (For English only)
* Min. Version for installing the app is iOS 5.0 2.3 10/23/2012 Minor UI changes. 2.2 06/08/2012 Added support for Russian. 2.1.1 02/16/2012 -iOS 5 tested
-iPhone 4S tested
-Resolution in rolling mode has been improved
-Disabled data logging in rolling mode for 1st and 2nd gen devices
-Improved FFT performance and resolution 2.1.0 11/08/2011 Added demo/settings mode
Units correction in the trigger menu
Added optimization for display
Optimized persistence operation 2.0.1 09/01/2011 The interface was redesigned on the iPad platform to maximize waveform display!
New Features:
-FFT
-Data Logging
-Consistent user interface across all compatible devices
-User interface upgraded for iPad/iPad 2 with the following:
*Waveform display screen maximized
*Menu bar added
*Added pick wheels for easy access of measurements
*Merged Stop/Run and Single into menu bar (click and hold to change modes)
*Channel selected by touching ground
*Reference wave display improved
*Analog channel migrated to menu bar
*Digital channels grouped in menu bar
*Demo icon now disappears when hardware is present
*Display menu options have been moved to Settings
-User interface upgraded for iPhone/iPod touch
*Enabled waveforms to be emailed
*Merged Stop/Run and Single into menu bar (click and hold to change modes)
*Advanced cursor features have been enabled.
*Increased number of measurements to six
*Reference wave display improved
*Demo icon now disappears when hardware is present 2.0.0 07/29/2011 This release coincides with our production release of hardware:
-Animated delay and trigger icons
-Adjusted labels for the reference wave and triggering menus
-Added ability to save multiple configurations
-Corrected normal mode waveform drawing
-Enhanced the channel selection and de-selection
-Enhanced measurements view
-Request users to rate app 1.1.0 04/28/2011 This release coincides with the production release of the hardware.
- Tested on iOS 4.3
- Tested on iPad 2
- Added ability to save reference waves
- Added variable analog persistence (iPad/iPad 2)
- Changed voltage and time scales to match final production hardware
- Added positive and negative clipping
- Increased number of measurements on iPhone/iPod Touch to 4
- Added localization for German, French, Italian, and Spanish languages
- Ground icons now indicate channel used for triggering
- Added 1 KHz reference wave output
- Added holdoff
- Added button to redirect to website if hardware is not connected 1.0.0 03/23/2011 0.9.0 02/09/2011
About iMSO
The company that develops iMSO is Oscium LLC. The latest version released by its developer is 4.0.
To install iMSO on your iOS device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2026-10-14 and was downloaded 40 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the iMSO as malware if the download link is broken.
How to install iMSO on your iOS device:
- Click on the Continue To App button on our website. This will redirect you to the App Store.
- Once the iMSO is shown in the iTunes listing of your iOS device, you can start its download and installation. Tap on the GET button to the right of the app to start downloading it.
- If you are not logged-in the iOS appstore app, you'll be prompted for your your Apple ID and/or password.
- After iMSO is downloaded, you'll see an INSTALL button to the right. Tap on it to start the actual installation of the iOS app.
- Once installation is finished you can tap on the OPEN button to start it. Its icon will also be added to your device home screen.
Program Details
System requirements
Download information
Pricing
Version History
version 4.0
posted on 2026-10-14
Version History Bug fixes. 4.0 07/29/2019 Bug fixes and UI enhancements. 3.4 11/24/2018 Bug fixes and UI enhancements. 3.3 10/09/2018 Fixed bugs.
* Special thanks to Bill for the bug report. 3.1 08/14/2017 *Added support for iMSO-204.
*Added all the features from iMSO2. 3.0 07/27/2017 Minor bug fixes. 2.8 07/20/2014 iOS 7 compatibility. 2.7 10/10/2013 Fixed a bug that causes a crash on the iPad (4th generation). 2.6 12/13/2012 Press the Menu button to show or hide the menu. 2.5 12/05/2012 Minor bug fixes. 2.4 11/02/2012 * Optimized for iOS 6.0.
* Optimized for iPhone 5.
* Optimized app to use less memory and run faster.
* Included text in body of email with screenshot.
* Various bug fixes.
* Included Tooltips (For English only)
* Min. Version for installing the app is iOS 5.0 2.3 10/23/2012 Minor UI changes. 2.2 06/08/2012 Added support for Russian. 2.1.1 02/16/2012 -iOS 5 tested
-iPhone 4S tested
-Resolution in rolling mode has been improved
-Disabled data logging in rolling mode for 1st and 2nd gen devices
-Improved FFT performance and resolution 2.1.0 11/08/2011 Added demo/settings mode
Units correction in the trigger menu
Added optimization for display
Optimized persistence operation 2.0.1 09/01/2011 The interface was redesigned on the iPad platform to maximize waveform display!
New Features:
-FFT
-Data Logging
-Consistent user interface across all compatible devices
-User interface upgraded for iPad/iPad 2 with the following:
*Waveform display screen maximized
*Menu bar added
*Added pick wheels for easy access of measurements
*Merged Stop/Run and Single into menu bar (click and hold to change modes)
*Channel selected by touching ground
*Reference wave display improved
*Analog channel migrated to menu bar
*Digital channels grouped in menu bar
*Demo icon now disappears when hardware is present
*Display menu options have been moved to Settings
-User interface upgraded for iPhone/iPod touch
*Enabled waveforms to be emailed
*Merged Stop/Run and Single into menu bar (click and hold to change modes)
*Advanced cursor features have been enabled.
*Increased number of measurements to six
*Reference wave display improved
*Demo icon now disappears when hardware is present 2.0.0 07/29/2011 This release coincides with our production release of hardware:
-Animated delay and trigger icons
-Adjusted labels for the reference wave and triggering menus
-Added ability to save multiple configurations
-Corrected normal mode waveform drawing
-Enhanced the channel selection and de-selection
-Enhanced measurements view
-Request users to rate app 1.1.0 04/28/2011 This release coincides with the production release of the hardware.
- Tested on iOS 4.3
- Tested on iPad 2
- Added ability to save reference waves
- Added variable analog persistence (iPad/iPad 2)
- Changed voltage and time scales to match final production hardware
- Added positive and negative clipping
- Increased number of measurements on iPhone/iPod Touch to 4
- Added localization for German, French, Italian, and Spanish languages
- Ground icons now indicate channel used for triggering
- Added 1 KHz reference wave output
- Added holdoff
- Added button to redirect to website if hardware is not connected 1.0.0 03/23/2011 0.9.0 02/09/2011
version 4.0
posted on 2019-07-29
Bug fixes.
version 4.0
posted on 2019-07-29
Jul 29, 2019
Version 4.0
Bug fixes.
